30" Stop Sign

Our 30" aluminum Stop sign is made from .080 aluminum. This Stop sign is available with a choice of Engineer, High Intensity or Diamond Grade sheeting. Engineer grade sheeting does not meet Minimum Reflectivity Requirements of the Federal Highway Administration.

The 30” Stop sign is recommended for Conventional Road use.

• Manufactured from .080 aluminum. This aluminum will not tarnish, rust or corrode.
• Choice of reflective 3M Engineer, High Intensity or Diamond Grade sheeting for sign face (background).
• Reflective red and white sign face.
• Mounting holes centered at the top and bottom for easy trouble free installation.

Sheeting refers to the reflective material applied to a sign. How reflective a sign is will depend on the type of sheeting used.

• Engineer sheeting is a durable, enclosed lens reflective sheeting introduced in 1950. This material is typically used for signs in areas with low volume, lower speed traffic and little competing surround light.  Signs with this sheeting are used in off-street locations only.
• High Intensity sheeting is an encapsulated lens reflective sheeting that is highly reflective at wide angles to approaching traffic.  Signs with this sheeting are most commonly used on public roads.
• Diamond Grade signs found on this web site are made from a durable white or fluorescent microprismatic lens sheeting.  These are highly visible signs.  The lime (yellow-green) signs, in particular, are highly visible during daytime, twilight, nighttime, and in inclement weather.